5A Half-Bridge Mosfet High and Low Side Driver EG2104 Power Module

Description

5A Half-Bridge Mosfet High and Low Side Driver EG2104 Power Module

Typical Applications:

• Buck converter

• Boost converter

• Synchronous rectifier

• DC motor driver

• BLDC / 3-phase inverter

• High-side/low-side switch

Key Features

• Half-Bridge Driver based on EG2104

• Dual N-Channel MOSFETs in TO252-2 package

• Compatible with PWM control logic (IN + SD)

• Integrated bootstrap circuit for high-side driving

• Gate drive protection diodes for fast switching

• Suitable for low-voltage motor control or DC-DC converter designs

• Breadboard-friendly 2.54mm pitch headers

• Designed for modular assembly of complex topologies (e.g., full-bridge, 3-phase)

Electrical Specifications

Note: VIN and VCC can be same or isolated based on application.

🔌 Pinout Description

Physical Characteristics

• Board Size: ~28 mm × 25 mm

• Mounting: 2.54mm pin headers for breadboard or sockets

• Silkscreen Labeling: Clearly marked pins and orientation

• SMD Components: Professionally assembled with compact layout

• MOSFET Heatsinking: TO252 pads with thermal vias for heat dissipation

⚠️ Notes

• Ensure proper heatsinking and ventilation at high currents.

• Bootstrap capacitor is included for high-side drive.

• SD pin must be HIGH for operation (defaults to NC, add pull-up as needed).

• The circuit has onboard fast Schottky diodes for improved switching speed.

Truth Table

Note: SD = 0 disables both outputs regardless of IN.