DC DC Adjustable Step-Up Boost Module MT3608

SKU: MT3608
Out of stock
EGP 45.000 exc. vat
Out of stock



The MT3608 Mini Adjustable DC-DC Boost Module is a low cost module that can step-up a 2.5 to 24V input voltage up to a 5 to 28V output at up to 1.5A.


  • MT3608 Mini Adjustable DC-DC Boost Module


  • Small size
  • MT3608 converter IC
  • Adjustable output voltage using adjustment potentiometer
  • Excellent load and voltage regulation
  • Output current of up to 1.5A
  • Input voltage range 2.5 to 24V
  • Output voltage range 5 to 28V

DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than it inputs.

This boost converter is adjustable and capable of outputting a voltage in the range of 5.0 to 28V at a continuous current of up to 1.5A depending on input/output voltage settings with 1A available with most settings.

Since it is a boost converter, the input voltage must be lower than the output voltage.

The device is able to use low ESR bulk ceramic capacitors rather than electrolytic caps which avoids long-term aging concerns and contributes to the compact packaging.

The MT3608 converter IC has over current and thermal limiting features built-in to safely shut the device down if driven too hard.

Voltage Adjustment

The module has a single-turn potentiometer for adjustment of the output voltage.

Turning the pot CW decreases the output voltage while turning it  CCW increases the output voltage.

The upper limit of the adjustment range will depend on the input voltage and the load.  With a 9V input for instance, at 1A, the upper voltage limit will be approximately 20V.

Module Connections

These are compact boards with 4 solder pads for making connections.

  • VIN+ =      Input Voltage
  • VIN- =       Ground
  • VOUT+ = Output Voltage
  • VOUT- =  Ground.  Connected to VIN- on module

Note that the pinout is not on 0.1″ centers.


For the price, these are decent modules that can be used in a number of non-critical applications.  They work best when the output current is kept on the lower end of the spectrum such as 500mA or so.  If trying to pull higher current from the module, voltage regulation and load regulation can become poor and in that case the module will work best when used with a fairly stable load and input voltage.

Ripple voltage – Measured @ 500mV typical.  It can benefit greatly from adding a bulk filter capacitor on the output.  In one worst case test case, a 100uF cap knocked the ripple down from 0.9V to 30mV

Voltage regulation – With the output adjusted to 12V and 500mA load, varying the input voltage over the range of 5 – 9V resulted in a 0.11V change in the output.

Load regulation – With input of 5V and output adjusted to 12V, varying the load over the range of 0.0A to 0.5A resulted in a 0.17V change in the output.  Further increasing the load to 1A resulted in a drop of 1.3V

These modules do draw 1mA or so when idle, so if using with a battery, it can drain the battery down when not being used  if it is not disconnected.


Additional information

Dimensions3.7 × 1.7 × 1.7 cm





There are no reviews yet.

Be the first to review “DC DC Adjustable Step-Up Boost Module MT3608”

Refund Policy for UGE Electronics “Https://uge-one.com “


1. Returns and Refunds

Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.


2. Eligibility for Refund

To be eligible for a refund, please make sure that:

– The item was purchased in the last 14 days.

– The item is in the original packaging.

– The item isn’t used or damaged.


3. How to Initiate a Refund

To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.


4. Refund Processing Time

Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.

If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.


5. Shipping Costs

Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.


6. Exchanges

If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.


7. Damaged or Defective Items

If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.


8. Contact Information

If you have any questions about our Refund Policy, please contact us at [[email protected]].


Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.

Product Enquiry

Please Login to make enquiry about this product
DC DC Adjustable Step-Up Boost Module MT3608
DC DC Adjustable Step-Up Boost Module MT3608 EGP 45.000 exc. vat
Out of stock