Description
CA-IS3050U Isolated CAN Transceiver SMD SOP8
Features:
• Comply with ISO11898-2 standard
• Up to 5000VRMS isolation voltage
• Logic side I/O voltage range supports 2.5V ~ 5V
• Signaling rates up to 1 Mbps
• High common-mode transient immunity: 150 kV/μs (typ)
• –40 V to 40 V bus fault protection
• Low loop delay:
– 150 ns (typ)
– 210 ns (maximum)
• Drive (TXD) master dynamic timeout function
• Thermal shutdown protection
• Bus supports up to 110 nodes
• Unpowered nodes do not interfere with the bus
• Temperature range: –40°C to 125°C
• Safety and Regulatory Approvals:
– In accordance with DIN VDE V 0884-11 (VDE V 0884-11) and DIN EN
&IEC 62368-1 VDE certification (pending)
– UL 1577 certified, 5 kV RMS for 1 minute
– Enhanced to 5kVRMS per IEC 62368-1 and IEC 61010-1
insulation
– Enhanced to 5kVRMS to EN 62368-1 and EN 61010-1
insulation
– Passed CQC of GB 4943.1-2011 and GB 8898-2011
Reinforced insulation
application
• CAN data bus
• Industrial field network
• Automation of environmental controls in buildings and greenhouses
• security system
• transportation
• Medical
• Telecommunications
Additional information
Weight | 0.002 kg |
---|
You must be logged in to post a review.
4N35 OptoCoupler Optoisolator DIP IC
Carbon Resistor 0.25W 4.7R 4.7 Ohm
Weighing Sensor Electronic Balance Wired Load Cell Sensor 10Kg
3D Printed Mobile Holder – Modern Flexible Design
M5 Nut for Threaded Rod Hex Nut 5mm
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.