Dual DC Motor Driver 7A 160 Watt Module / board H Bridge L298 logic

Description

Dual DC Motor Driver 7A 160 Watt Module / board H Bridge L298 logic

Functional characteristics:

1. Very small size, only if 5.5 cm * 5.5 cm

2. Support voltage from 7V to 24V, undervoltage protection

3. Dual motor interface with rated output current 7a

4. Similar to L298 control logic, each line supports three wire control, positive reverse and brake

5. The signal enable can be externally connected to the PWM, and the positive and negative control signals can be connected in series with the limit switch

6. Control signals use the current driving mode, which supports most single-chip direct drives

7. All control signals are isolated using an optical connector

8. ESD circuit

Technical specifications:

1. Voltage range: Input: DC 6.5 V-27 V

2. Rated input voltage: 12V / 24V DC

3. Output Channel Number: 2

4. Rated output current per channel: 7A

5. Maximum output current per channel: 50A

6. Rated output power per path: 84 W (12 V), 168 W (24 V)

7. Pilot signal voltage: 3 ~ 6.5 v

8. Line control signal current: 3 ~ 11 mA

9. Support PWM frequency range: 0 ~ 10 kHz

10. Minimum Effective Pulse Width PWM: 10 US

11. Operating temperature: 25 ℃ ~ 80 ℃

12. Size: 5.5 cm × 5.5 cm × 2.0 cm

Suitable for engine parameters:

• Rated motor voltage 24 V, rated power 115 W and below the correct logo or logo below 7A Rated motor current full working long time

• Motor rated voltage 12 V, rated power 40 W and below the correct logo or logo below 7A Rated motor current full working long time