GDS-1052-U DSO | Digital Storage Oscilloscope

specification

GDS-1052-U

GDS-1072-U

GDS-1102-U

vertical

aisle

2

2

2

bandwidth

DC ~ 50MHz (-3dB)

DC ~ 70MHz (-3dB)

DC ~ 100MHz (-3dB)

Rise Time

About <7ns

About <5ns

About <3.5ns

Sensitivity

2mV / div ~ 10V / div (1-2-5 steps)

Accuracy

± (3% × | read value | + 0.1div + 1mV)

Input coupling

AC, DC, GND

input resistance

1MΩ ± 2%, about 15pF

polarity

Normal, reversed phase

Maximum input

300V (DC + AC peak), CAT II

Waveform signal processing

+, -, FFT

Offset range

2mV / div ~ 50mV / div: ± 0.4V; 100mV / div ~ 500mV / div: ± 4V; 1V / div ~ 5V / div: ± 40V;

Bandwidth limit

20MHz (-3dB)

trigger

Trigger source

CH1, CH2, Line, external

mode

Automatic, Normal, Single, TV, Edge, Pulse Width

coupling

AC, DC, low frequency suppression, high frequency suppression, noise suppression

Sensitivity

DC ~ 25MHz: about 0.5div or 5mV; 25MHz ~ 50/70 / 100MHz: about 1.5div or 15mV

External trigger

range

± 15V

Sensitivity

DC ~ 25MHz: about 50mV; 25M ~ 50/70 / 100MHz: about 100mV

input resistance

1MΩ ± 2%, about 16pF

Maximum input

300V (DC + AC peak), CAT II

Level

range

1ns / div ~ 50s / div (1-2.5-5 step); ROLL; 50ms / div ~ 50s / div

mode

Main time base, window, zoom in window, scroll, XY

Accuracy

± 0.01%

Pre-trigger

The largest 10 grid

Post trigger

1000 cells

XY mode

X-axis input

Channel 1

Y-axis input

Channel 2

Phase shift

± 3 ° at 100kHz

Signal acquisition

Real-time sampling rate

Maximum 250MSa / s

Equivalent sampling rate

Maximum 25GSa / s

Vertical resolution

8 bits

Record length

Maximum 4k points

Get mode

Normal, peak detect, average

Peak detection

10ns (500ns / div ~ 50s / div)

Average number of times

2 4 8 16 32 64 128 256

Cursors and measurements

Voltage measurement

Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, rising surge voltage / surge voltage, falling surge voltage / surge voltage

Time measurement

Frequency, Period, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Duty Cycle

Cursor measurement

Voltage difference between cursors (ΔV), time difference between cursors (ΔT)

Automatic counting

6-bit resolution; Accuracy: ± 2%; Signal Source: All available trigger sources except video triggering mode

Adjust the probe compensation signal

Frequency Range

1kHz ~ 100kHz, 1kHz / STEP

Duty cycle range

5% ~ 95%; 5% / STEP

Control panel features

auto configuration

Automatically adjust vertical VOLT / DIV, horizontal TIME / DIV and trigger level

Save Settings

Up to 15 sets of measurement conditions

Save the waveform

15 sets of waveforms

display

TFT LCD type

5.7 &&

display resolution

234 (vertical) × 320 (horizontal) point

Display the grid

8 × 10 grid

Display brightness

Adjustable

interface

USB Device

USB1.1 & 2.0 full speed compatible

USB Host

Image (BMP) Waveform Data (CSV) and Settings (SET)

power supply

Linear voltage range

AC 100V ~ 240V, 48Hz ~ 63Hz, automatic selection

other

Multilingual menu

Available

Online help

Available

size and weight

310 (W) × 142 (H) × 140 (D) mm, about 2.5 kg