PCB For STM32F103Cx Bluepill ARM development board
Description
PCB For STM32F103Cx Bluepill ARM development board
Introduction: An improved version of the famous BluePill development board, compatible with most ARM/RISC-V MCUs in LQFP-48 packages. Compared with other versions on the market, it is fully pin-compatible, has higher reliability for DIY soldering tests.
you use this link as soldering guide and bill of materials also included
LQFP-48 packaged STM32/GD32/AT32 microcontroller chips, including but not limited to the following models:
- STM32F103C8T6
- STM32F030C8T6
- GD32F103C8T6
- GD32F130C8T6
- GD32F150C8T6
- GD32F330C8T6
- GD32F303CCT6
- GD32E103C8T6
- GD32E230C8T6
- GD32VF103C8T6
- AT32F415CBT7
- AT32F413CBT7
- AT32F421C8T7
- AT32F425C8T7
The pin arrangements of these models are compatible and can all use this development board.
Compared with other versions on the market, the improvements are as follows:
- USB replaced with direct plug MicroUSB, strong and durable
- The BOOT0 selection is changed to a button. Press and hold BOOT0 and then press NRST to enter the built-in Bootloader.
- The 32.768 crystal oscillator is replaced with a 3×8 package and is not soldered by default.
- The VBAT pin uses a 0R resistor to connect to the onboard 3.3V power supply
- The SWD interface sequence is changed to CLK, DIO, GND, 3V3
You must be logged in to post a review.
Flat Head Screw M5X20 Thread
24C512 2-Wire Serial EEPROM 512K for Arduino
USB Female to Micro USB Male Adapter for Computer accessories
IRF540N Mosfet
APC Essential SurgeArrest 5 oulets 230V Germany PM5-GR
IRF7416TRPBF 30V 10A P Channel MOSFET SMD Transistor SOP8
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.