ESP8266 ESP12 ESP01 USB programmer board with spring pogo pins
Use our new product ESP8266 ESP12 ESP01 USB programmer board with spring pogo pins to Program your ESP module quickly. The USB ESP12 and ESP01 programmer can flash ESP12 modules in circuit without having to desolder them first. It features spring pogo pins to be directly pressed onto the ESP.
For Mre Products Like that Click Here
- Just Connect a USB cable (not included) to our module and open the Arduino IDE PlatformIO or others to upload code.
- our module features a RESET circuit similar to nodeMCU so you can upload without having to press a button.
- IO0 and RESET are still routed to buttons, so the ESP can quickly be reset or put into programming mode manually if needed.
The USB to serial converter is an CH340 which works natively in the Arduino IDE on Windows, Mac and Linux. Moreover there is also a power LED and a LED for IO0.
It can also flash ESP07, ESP12, ESP12E and ESP12F, most certainly all others that have the same pinout and spacing.
also our module has an on board 3.3V regulator 😍 which can directly supply the ESP.
10k pull up resistors on RST and GPIO2, pull down on EN and GPIO15. For quick diagnosis GPIO0 has a LED and a button (FLASH). RST also has a button for easy programming. The buttons are only needed when you’re not using the micro USB connector.
If you have any questions, modifications, just send us a message!
Note: ESP01 or ESP12 Sold alone.
The ESP is not included 😉
1 Module of ESP8266 ESP12 ESP01 USB programmer board with spring pogo pins.
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or . Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.